The YARI Power Module (3-12S) is a compact, high-reliability power module for drones, rovers, and unmanned systems using Pixhawk Autopilot Bus (PAB) carrier boards. It delivers a stable 5.2 V / 6 A regulated rail while pass-throughing main battery power, and comes with Digital Power Monitoring for Pixhawk Autopilot Bus (PAB) based carrier boards.
Key Highlights
- Clean 5.2 V regulated output up to 6 A for avionics and peripherals.
- Onboard TI INA238 power monitor with precision 0.0005 Ω shunt for accurate telemetry.
- Wide battery input range (3–12S) with design ceiling up to 75 V.
- PCB power path rated 60 A continuous and 100 A burst (< 1 min).
- Designed for 35 A continuous and 60 A burst (< 1 min) with pre-installed XT60H connectors and 12 AWG leads.
- Plug-and-play with XT60H battery connectors and 6-pin Molex CLIK-Mate main output.
- Transparent heat-shrink wrap pre-applied for PCB protection without adding bulk.
- Basic output over-current protection on the regulated rail.
Note: Continuous and burst current limits depend on connectors, wire gauge, airflow, and thermal conditions. Verify suitability for your platform and mission profile.
Package Includes
- 1× YARI PAB Power Module
- 1× 6-pin Molex CLIK-Mate cable
Specifications
| Interface | |
|---|---|
| Telemetry interface | I2C |
| Main output connector | 6-pin Molex CLIK-Mate, 2.00 mm pitch |
| Battery connections | XT60H input and output |
| Electrical | |
| Regulated output | 5.2 V |
| Maximum output current | 6 A |
| Input voltage | 3S-12S battery support; up to 75 V maximum input |
| Minimum input at full output load | 10 V minimum for 6 A output |
| PCB power path rating | 60 A continuous / 100 A burst for less than 1 minute |
| XT60H + 12 AWG lead rating | 30 A continuous / 60 A burst for less than 1 minute |
| Recommended operating current | 35 A continuous / 60 A burst for less than 1 minute, subject to connectors, wire gauge, airflow, and thermal conditions |
| Monitoring and Protection | |
| Power monitor | TI INA238 digital power monitor |
| Current shunt | 0.0005 ohm shunt |
| Protection | Output over-current protection on the regulated rail |
| Mechanical | |
| Insulation | Transparent heat-shrink enclosure |
| Dimensions | TBD |
| Weight | TBD |
| Other | |
| Compatibility | Designed for PAB carrier boards and 3S-12S battery systems |
| Country of origin | India |